ul. Kolejowa 6, 38-700 Ustrzyki Dolne
I want to add files
The sectional garage doors constitute systems used in garages and storage rooms. They are characterised by excellent insulating and acoustic properties, due to sealing placed on all edges of the structure.
Furthermore, surface of the garage door is made of hot-dip galvanised panels, covered with the use of polyester varnish or renolit, along with the CFC-free polyurethane foam filling. In addition, the convenience of application of the sectional garage doors is influenced by the possibility of using an electric drive, which significantly facilitates their operation.
xterior roller blinds fulfil the function of effective protection of a house or a building. They contribute to safety due to the possibility of using various types of anti-burglar accessories in them. Furthermore, their design and materials used to manufacture them result in the fact that they are characterised by very good thermal insulation properties.
These products protect against cold in winter and against sunlight during summer. Moreover, exterior roller blinds also provide appropriate protection against noise, due to the acoustic insulation. The method of raising and lowering the roller blinds depends on the chosen variant - there are models equipped with a string, mechanical drive or electric drive.
their installation can be implemented at the stage of construction of a given building, as well as after completion of the finishing works. The principle of operation of this type of blinds is based on the winding of the blinds into an aluminium box, which is located on the wall or frame. Appearance of the box visible from the outside is adapted to the building, in order to ensure that is constitutes a coherent element of the entire structure.
their use should be planned already at the stage of design. This results from the need to properly prepare the lintel with an external recess, in which the roller blind box will be placed. Installation of this type of blinds in finished buildings is possible if the place for the box is correctly prepared.
this system is installed in the building simultaneously with the window, therefore in the scope of window’s dimensions, it is necessary to take into account the place, in which the winding box will be located. Furthermore, such roller blinds are made of aluminium or PVC profiles, filled with polyurethane foam. This type of system enables the servicing of roller blinds from the inside.
The roller blinds and shutters available in our offer constitute practical solutions that can be used in any given room. They will increase your safety, protect against the sun and cold, as well as provide you with an appropriate level of privacy at home. Furthermore, you can use them not only in the living room and bedroom, but also in the kitchens and bathrooms.
1.Mini free-hanging or built-in roller blinds
2.Day-night free-hanging or built-in roller blinds
3.Roman roller blinds
An inlet vent is a device that allows air to be supplied to the rooms equipped with gravity ventilation, mechanical exhaust ventilation
or hybrid ventilation. Even in the case of tightly closed windows, the inlet vents allow to supply fresh air in a continuous manner, in
the amount compliant with the applicable regulations.
Due to the principle of operation, inlet vents are divided into three basic types:
Hygro-controlled inlet vents
Automatically controlled devices equipped with a sensor that analyses changes in the relative humidity level in the room, and accordingly modifies the opening of an inlet vent
Pressure inlet vents
Self-regulating devices - the flow rate depends on the pressure difference inside and outside the room. Along with the increase in pressure difference, the air inflow also increases
Manual inlet vents
the user regulates the degree of opening of the inlet vent, so by changing the damper position, the user decides about the amount of supplied air
EMM
EXR
ventair higroster
akustik
AMO
AMD
INSOLIO F
URBINO TRDn
VENTAIR TRDn
VENTAIR TRDn Akustik
AMO
RAL 9016
RAL 8003
RAL 7016
RAL 8017
Window sills made of sheet metal and aluminium are manufactured in accordance with the requested dimensions, while maintaining the required angles. Furthermore, they are characterised by high resistance to atmospheric conditions, high quality of workmanship and rich colours. Our offer is complemented by mounting elements in the form of plugs and connectors, available in compatible colours that improve aesthetics of the finishing.
Dimensions: Dimensions according to the client's request
Material: Steel sheet metal, Stainless sheet metal, Aluminium
Coating: Galvanised, Aluzinc, Regular, Premium, Premium NPT STRONG
Colours: Standard palette Full RAL palette is available at the special request
thickness of the window sill: 20-50mm
maximum length of one element: 6000 mm
maximum width of one element: 100-800mm
type of wood: pine, meranti or oak
finishing standard: rounded or straight corners
wide selection of colours
thickness of the window sill: 20mm
maximum length of one element: 6000 mm
available widths: 150mm, 200mm, 250mm, 300mm, 350mm, 400mm
affordable price
quick installation
PCV
Nut
PCV
Golden oak
PCV
Apple tree
PCV
Dark Oak
PCV
Birch
PCV
Marble
PCV
White
PCV
Graphite
thickness of the window sill: 20mm, 30mm
maximum dimensions of one element: 1200x3000 mm
finishing standard: rounded or straight corners
wide selection of colours and structures
exceptional physical and mechanical properties
A100
Botticino
A200
Botticino
A400
Arabescato Bianco
A500
Brecia Onciata
A600
Rosso Asiago
A800
Perlato Royal
A850
Olympo
A900
Rasotica
B100
Carrara Micro
B200
New Marfil
B300
Fiorito
B400
Polare
B500
Crystal White
C100
Misty White
C200
White Pearl
C500
Silver Grey
C300
Baltic Gray
C400
Nordic Black
C600
Beige Luna
B600
Royal White
This type of mosquito net can be successfully adapted to most windows.
This type of mosquito net is attached to the window frame or door frame. Installation stability is ensured by special hinges characterised by a patented pre-tension system of the self- closer. Furthermore, the set also includes a handle facilitating its opening, as well as magnets for closing.
This type of mosquito net constitutes a functional solution for large balconies, terraces and winter gardens. Its movable leaf moves on two rails installed in the upper and lower section. Moreover, this mosquito net can be installed in any window or door, while its shape does not require the use of a handle.
A pleated mosquito net can be manufactured with a width up to 4 m, therefore it is the perfect solution for very large terrace doors and balconies. During winding, the net is folded into an accordion, and subsequently hidden in the side profile. Moreover, it can be closed in any given position, while its aluminium structure ensures resistance to atmospheric conditions.
Ornamental glass constitutes decorative glass panes equipped with a decorative structure, which limits visibility. One side of the glass includes a structural pattern, while the other side of the glass is smooth. An extensive selection of decorations results in the fact that ornamental glass can be characterised by any given light transmittance - from low to fully transparent.
Secustik
The Secustik® window handles are equipped with a locking mechanism, which constitutes an integrated basic protection that makes it very difficult to move the window fittings from the outside.
Button
The window handle with a button protects against uncontrolled opening of the window. Simultaneous pressing of the button and turning of the handle activates the lock in the position, in which such window is tilted, opened or closed.
Key
The window handle equipped with a key allows to lock the handle movement in the position of closed or tilted window. The above-mentioned locking is carried out by pressing the button with an insert. Unlocking of the handle, and e.g. full opening of the window, requires the use of a key.
TBT
The window handle equipped with a key allows to lock the handle movement in the position of closed or tilted window. The above-mentioned locking is carried out by pressing the button with an insert. Unlocking of the handle, and e.g. full opening of the window, requires the use of a key. Tilt Before Turn (TBT), i.e. tilt it prior to opening, is intended only for windows equipped with perimeter fittings. The TBT technique allows for the handle to be locked using a key in the tilted position (90°). Further turning of the handle to the opening position (180°) is possible only after its subsequent unlocking.
SecuForte
This window handle is automatically locked in the closed and tilted state. This results from the fact that the handpiece of the handle and the spindle are not connected with each other. The handle is automatically locked - a unique security concept, which effectively protects against unauthorised opening of the window from the outside.
VarioFit
This type of window handle is equipped with a spindle with length adjustment, which allows to adapt its length to the given depth of the window profile.
0700
0710
0737
0755
0810
1003
1005
1005VL1
1005VR1
1006
1007
1008
1009
1012
1012VML
1012VMR
1030
1031
1012VML
F1
F2
F3
F4
F9
8022
8077
9016
9001
The most frequently chosen solution among the clients consists of door fittings with handles on both sides. The sets
along with a mechanism supporting movement of the handle constitute universal door equipment, which ensures
comfort during everyday use.
Furthermore, there is also a possibility to install knobs or handrails on the external side of the door. The available models
include fixed and rotary variants. Fixed handles are suitable for the situation, in which we want to quickly and conveniently
close the door without using a key.
26G1
26P
32G3
0755
35G1
35V
113
1003
1003
1010
1031
1040
1117
1200
1540
1710
2000
2200
P300D
P300o
P300V
pochwyt rurowy
PRI
PRII
F1
F2
F3
F4
F9
8022
8077
8019
9016
9001
Are window elements, whose task is to divide window pane into smaller parts. Furthermore, they also strengthen the entire structure and ensure its rigidity.
These elements are installed inside the composite glass and they ensure a smooth surface of the window. Moreover, this solution makes it easier to clean the windows.
their installation is easier, because it consists of gluing muntins on both sides of the window pane. These elements are available in the form of slats, which are adapted to the frames of the window.